Foam-Control gives you control over the design of your project. You determine the shape and specs of the components you need, then your Foam-Control supplier works with you to deliver them on time and within budget. Foam-Control is an amazingly strong and versatile material. Consisting of over 90% air, Foam-Control is available in a range of Types to provide the properties needed for your design. Foam-Control is compatible with a variety of exterior finished coatings for maximum visual effect and durability. Foam-Control shapes are custom fabricated by hot wire cutting with computer aided design, and assembled together to provide a solution specific to your needs.
Foam-Control is a cost-effective, durable, and energy efficient solution for cavity wall applications. It is an ideal material to stop energy loss in residential and commercial masonry and framed walls. Foam-Control is available in a range of thicknesses to meet your local energy code requirements.
Foam-Control for poured-in place and precast concrete systems reduce the need for concrete and overall weight. Use Foam-Control for: concrete sandwich panel cores, block-outs/knock-outs, void fillers, custom pattern forms, and more. It is an ideal material to stop energy loss through the wall.
Foam-Control Nailbase provides both insulation and a nailable substrate for roofing or wall cladding materials. Foam-Control Nailbase installs quickly over structural roof decking and walls with screw connections. Standard roofing materials such as shingles, shakes, standing seam metal, tile, slate, etc., may be applied to Foam-Control Nailbase. Wood, vinyl, metal, stucco, etc., are all installable wall claddings over Foam-Control Nailbase.
Foam-Control Nailbase 2-Ci provides both insulation and a nailable substrate for wall cladding materials. 2-Ci is the ideal two-in-one continuous insulation (Ci) sheathing board. 2-Ci installs quickly over residential and commercial wood framing members using compatible pneumatic nail guns. Standard wall claddings such as wood, vinyl, stucco, cement boards, etc., and code required weather resistive barriers can be installed over 2-Ci.
Foam-Control Nailstrip consists of factory installed furring strips and UL Classified Foam-Control rigid insulation. It is an ideal insulation and nailable surface when applied over structurally sound walls such as poured concrete, concrete block, brick, wood and steel framing. Stability makes Foam-Control Nailstrip perfect for both residential and commercial wall applications.
Foam-Control with Perform Guard® is a cost-effective, durable, and energy efficient solution for below grade insulation applications. It is an ideal material to stop energy loss at the foundation or slab. Foam-Control with Perform Guard is a proven material with built in protection against the destructive force of termites. Foam-Control is available in a range of thicknesses to meet your local energy code requirements.
Foam-Control Protection Boards are economical, light weight and easy to install over foundation walls that have been damp-proofed or water-proofed with coatings/membranes. Installed prior to backfilling, Foam-Control Protection Boards provide impact puncture protection for foundation wall coatings/membranes from rocks and potential construction debris in backfill soil. Protection is also provided against crushed stone/gravel used in many foundation drainage designs. In cold regions, Foam-Control Protection Boards bond-break the soil from the foundation wall and as insulation reduces potential damage of freeze thaw cycling.
Foam-Control is a cost-effective, durable, and energy efficient solution for insulation applications. It is an ideal material to stop energy loss. Foam-Control Radiant Floor Boards for use in radiant floor systems are provided in two configurations: 4’ x 4’ boards with 3” on center slots for fast installation of PEX tubing in hydronic radiant systems and 4’ x 8’ flat sheets for use in electric radiant systems.
Foam-Control Tongue and Groove is a cost effective, durable and energy efficient solution for increasing the performance of stucco applications over framed walls. It is an ideal material to stop energy loss through framing members. Foam-Control T&G is available in a range of R-values to meet your local energy code requirements.
Variable thickness flat stock or fabricated Foam-Control can be used in numerous configurations with Polyiso roof insulation (below, between, above) achieving optimum function and cost. Foam-Control is cost-effective, durable, energy efficient, and easily fabricated making the production of custom tapers, crickets, saddles, flute filler, and flat stock ideal to use in combination with Polyiso insulation.
Foam-Control Direct-to-Deck is compatible with all major roofing materials and assemblies. Additional benefits such as design flexibility, resistance to moisture, and high R-value make Foam-Control roof insulation the preferred roofing solution among Contractors, Architects and Engineers. It is also one of the most cost-effective steel deck roofing insulations on the market.
Foam-Control faced roof insulation come with a factory applied fiberglass fire resistant facer that replaces the need for coverboards of gypsum, woodfiber and perlite over molded polystyrene in selected Single-Ply Membrane roofing systems. Foam-Control faced roof insulation can be applied directly to metal decks providing a one step insulation and fire resistant facer system without the use of a code specified thermal barrier, resulting in reduced material and labor costs.
Foam-Control for use in lightweight insulation concrete roofing systems reduce the requirement for concrete and overall weight. Cost effective thermal design is among the highest priorities in construction. Foam-Control insulation products are available in a range of densities necessary to provide energy efficiency, structural integrity, and cost effectiveness. They are proven to lower energy costs, saving both money and precious resources.
Foam-Control gives you control over the design of your project. You determine the shape and specs of the components you need, then your Foam-Control supplier works with you to deliver them on time and within budget. Foam-Control is available in a range of Types to provide the properties needed for your design. Foam-Control is compatible with a variety of exterior finished coatings for maximum visual effect and durability. Foam-Control shapes are custom fabricated with computer aided design, and assembled together to provide a solution specific to your needs.
Foam-Control Flotation Blocks are highly buoyant and can be shaped for almost any application. One cubic foot of material will float 60 lbs. of weight at water level. Flotation Blocks can be made in a variety of sizes, and are easily installed using common tools and assembly techniques. Flotation Blocks are made from highly stable molded polystyrene. With proper care and protection they will not corrode, decay or sink when punctured, and will give years of flotation service.
Rising energy costs have made it increasingly important that a home is well insulated. A well insulated attached garage will help stabilize the temperature in the home, resulting in reduced energy bills and a more comfortable living environment. Foam-Control used in Garage Door Cores combines durability, versatility and reliability with a high R-value, making it the preferred insulation for commercial and residential doors.
Tiny beads that expand into great products. Foam-Control provides the control for design and performance you need to cost-effectively enhance your product’s value. Ideal for strong, lightweight components in garage doors, refrigerators, compressors, cabinets, insulation and more. Ideal for lost foam casting, versatile production, cut, shape mold, laminate and fabrication. Superior insulation value for applications needing temperature control and meets a wide range of industry specifications and certifications.
Foam-Control is a cost-effective, durable, and energy efficient solution for pipe insulation applications in the service range of temperatures from -100oF to 165oF. Foam-Control is available in standard and custom cut fabricated profiles to meet your pipe insulation project needs. Foam-Control pipe insulation assists with process control, energy conservation, and personal/equipment protection.
Foam-Control insulation can be easily cut to fit sidewalls, roofs and floors of Recreational Vehicles (RVs). Excellent surface bonding for lamination creates an envelope around the RV. Recreational Vehicle (RV) using Foam-Control insulation cores have fewer gaps resulting in substantially reduced heat transfer than with conventional stud construction.
Foam-Control gives you control over the performance of your cushion protective packaging. You determine the shape and specs of the components you need, then your Foam-Control supplier works with you to deliver them on time and within budget. One of the best features of molded polystyrene is its “moldability.” Foam-Control capitalizes on this feature to provide shock-absorbing packaging that is unique to your application. By shaping the material in specifically-designed molds, we can incorporate a precision fit with proven packaging techniques to attain the highest level of protection.
Foam-Control cushion protective packaging is custom fabricated with computer aided design, and if necessary, assembled together to provide a packaging solution specific to your needs. This method allows you maximum protection without the tooling expense associated with custom molded parts.